FAQ

Yes, but the data transfer speed will be limited by the motherboard and will not reach SATA 6 Gb/s performance.

This is due to a Windows licensing restriction. If your Windows 10 was obtained through an upgrade, the license is tied to the original hardware. Installing the SSD on another machine may trigger a blue screen or fail to activate. A clean installation of an authenticated Windows 10 will not encounter this issue.

A1-1: Please check whether the data cable, power cable, and slot are properly connected.
A1-2: Right-click the Start menu > go to “Disk Management” > locate the SSD > right-click > select “New Simple Volume” to initialize the drive.

Windows 10, Windows 8.1, and newer versions of Ubuntu and Linux distributions include native support for PCIe NVMe drives and can be installed directly.
For installing Windows 7, please refer to the following link or contact Microsoft:
https://support.microsoft.com/zh-tw/help/2990941

This is normal. The discrepancy is due to system calculations and allocation of space for firmware, software, and data management, which help enhance performance and prolong lifespan.

Yes, but the data transfer speed will be limited by the motherboard and will not reach SATA 6 Gb/s performance.

This is due to a Windows licensing restriction. If your Windows 10 was obtained through an upgrade, the license is tied to the original hardware. Installing the SSD on another machine may trigger a blue screen or fail to activate. A clean installation of an authenticated Windows 10 will not encounter this issue.

A1-1: Please check whether the data cable, power cable, and slot are properly connected.
A1-2: Right-click the Start menu > go to “Disk Management” > locate the SSD > right-click > select “New Simple Volume” to initialize the drive.

Please delete all partitions and disconnect all other drives, leaving only the target SSD connected. Enter BIOS, restore default settings, enable AHCI and UEFI modes, save the configuration, and reinstall the OS.

Please refer to the installation guide provided. If product damage, installation errors (e.g., misalignment or poor adhesion), or other issues occur, do not forcibly disassemble the unit. Doing so may cause physical damage. Contact customer service and return the product for proper handling.